Fabl. Design
Serving Fishers, IN · Hamilton County

Architectural design services in Fishers, IN

Fabl Design plans additions, remodels, ADUs, and custom homes for Fishers homeowners across Hamilton County. We work from Indianapolis, know how Central Indiana reviewers read a set of drawings, and handle the zoning details before they turn into redesigns.

Rendering of a home with a timber-columned covered porch and landscaped lawn, designed by Fabl Design
100+ home projects designed
Founded 2020
Vetted contractor network
Services

What we do for homeowners in Fishers

Every service we offer, delivered locally — with drawings your builder and your permit reviewer will both understand.

Find your zoning code

Look up your Fishers zoning district

Before design begins, confirm the district your lot sits in. The Fishers zoning map lets you search by street address or parcel number and shows the base district plus any overlays that affect what you can build.

  1. 1Open the Fishers zoning map and accept the parcel viewer disclaimer.
  2. 2Search by street address or parcel (tax) number to find your property.
  3. 3Note your base district and any overlays, then match them to the standards below.

Zoning maps are for general research only. Verify districts, overlays, and permitted uses with the Fishers planning department before making decisions — or send us your address and we'll confirm it for you.

Zoning & overlays

Single-family zoning codes in Fishers

The district your lot sits in sets your setbacks, height, and how much of the site you can cover. Here's a quick reference we use during schematic design in Fishers.

EREstate-Rural Residential District

Larger residential lots of at least one acre and rural lots with low environmental impact; a conservation subdivision option is available.

Min lot
1 acre (43,560 sq ft)
Min width
125 ft standard / 150 ft corner (50 ft frontage)
Front setback
60 ft (all street types)
Rear setback
50 ft
Side setback
30 ft
Max height
35 ft or 3.5 stories, whichever is greater
Coverage
35% max impervious area

Municipal water/sewer hookup not required. Minimum living area 2,000 sq ft (1-story) / 2,200 sq ft (2-story).

R1Residential District (R1)

Single-family detached homes at low density, roughly 1.0–1.5 dwelling units per acre.

Min lot
20,000 sq ft
Min width
125 ft standard / 150 ft corner (50 ft frontage)
Front setback
30 ft local street / 45 ft other street types
Rear setback
40 ft
Side setback
20 ft
Max height
35 ft
Coverage
35% max impervious area (up to 50% abutting Geist Reservoir)

Municipal water and sewer required. Minimum living area 1,800 sq ft (1-story) / 2,000 sq ft (2-story).

R2Residential District (R2)

Single-family homes at roughly 1.0–1.7 dwelling units per acre.

Min lot
15,000 sq ft
Min width
100 ft standard / 120 ft corner (50 ft frontage)
Front setback
25 ft local street / 40 ft other street types
Rear setback
40 ft
Side setback
15 ft (10 ft with attached side- or rear-load garage); 30 ft aggregate
Max height
35 ft
Coverage
35% max impervious area (up to 50% abutting Geist Reservoir)

Municipal water and sewer required. Minimum living area 1,600 sq ft (1-story) / 1,800 sq ft (2-story).

R3Residential District (R3)

Single-family detached homes at medium density, roughly 1.0–2.0 dwelling units per acre.

Min lot
12,000 sq ft
Min width
90 ft standard / 108 ft corner (50 ft frontage)
Front setback
25 ft local street / 40 ft other street types
Rear setback
30 ft
Side setback
10 ft (5 ft with attached side- or rear-load garage); 20 ft aggregate
Max height
35 ft
Coverage
40% max impervious area (up to 50% abutting Geist Reservoir)

Municipal water and sewer required. Minimum living area 1,250 sq ft (1-story) / 1,400 sq ft (2-story).

R4Residential District (R4)

Single-family homes at roughly 1.0–2.5 dwelling units per acre.

Min lot
10,000 sq ft
Min width
80 ft standard / 96 ft corner (50 ft frontage)
Front setback
25 ft local street / 40 ft other street types
Rear setback
25 ft
Side setback
10 ft
Max height
35 ft
Coverage
40% max impervious area (up to 50% abutting Geist Reservoir)

Municipal water and sewer required. Minimum living area 1,100 sq ft (1-story) / 1,350 sq ft (2-story).

R5Residential District (R5)

The highest single-family density range in Fishers, roughly 1.0–3.0 dwelling units per acre.

Min lot
7,500 sq ft
Min width
70 ft standard / 84 ft corner (50 ft frontage)
Front setback
25 ft local street / 40 ft other street types
Rear setback
25 ft
Side setback
10 ft
Max height
35 ft
Coverage
50% max impervious area

Municipal water and sewer required. Minimum living area 1,000 sq ft (1-story) / 1,200 sq ft (2-story).

Overlay districts to watch for

NPT-OLNickel Plate Trail Overlay

Layered over base zoning along the Nickel Plate Trail corridor to keep architecture, design, and landscaping consistent; overlay standards supersede conflicting base district rules.

  • Base district uses, dimensional standards, and height limits still apply unless the overlay modifies them
  • Consistent architectural and landscape treatment required along the trail corridor
  • Trail-adjacent development reviewed by the Plan Commission
GW-OLGreenway Overlay District

Applies to properties near greenways and parks shown on the Official Zoning Map, layered over base zoning to support pedestrian and bicycle connectivity.

  • Base district dimensional requirements and height limits apply unless modified by the overlay
  • Erosion and sediment ground-cover controls required for land-disturbing activity
  • New subdivisions must connect a shared-use trail to the Thoroughfare Plan greenway
  • ADA-compliant pedestrian access and multi-use path required per the Thoroughfare Plan
I69-OLInterstate 69 Overlay District

Applies to properties along the I-69 corridor to protect the corridor's appearance and economic value.

  • Restricts uses that would harm corridor aesthetics or economics
  • Interstate corridor landscape buffer: one canopy tree per 60 ft of I-69 frontage
  • Four-sided building architecture required

These figures are general guidance for early planning — final requirements depend on your parcel, overlays, and any prior variances. Verify with the Fishers codes department or the official zoning ordinance. We confirm them for your address before design begins.

Recent work

A few Fishers projects

Lakefront Farmhouse Addition, Hendersonville, Tennessee

Lakefront Farmhouse Addition, Hendersonville, Tennessee

This lakefront project reshapes an existing home into a cohesive farmhouse composition with shed dormers, a two-story rear porch, a gabled garage wing and a primary suite oriented toward the water. Simple white forms and dark roofs keep the expanded house calm and grounded on its rocky shoreline site.

Local process

Permitting & review in Fishers

Routine residential additions and remodels in Fishers are generally handled administratively by the Department of Community Development (Planning & Zoning) through building permit review for compliance with the Unified Development Ordinance's dimensional standards — setbacks, height, and impervious coverage — rather than a public hearing. Projects that cannot meet a district standard need a variance from the Fishers Board of Zoning Appeals, and larger or nonconforming changes may go to the Plan Commission. Properties in the Nickel Plate District or under an overlay such as the Nickel Plate Trail Overlay can carry added architectural and design review.

  1. 1Consultation & measure-up
  2. 2Design set + 3D renderings
  3. 3Builder's set
  4. 4Permit filing assistance
  5. 5Contractor matching & handoff
FAQ

Questions from Fishers homeowners

Planning guides for Fishers homeowners

Start your project

Designing a home project in Fishers?

Tell us about your space and what you're hoping to do. We'll write back within one business day.